THE PRESENTATIONS ARE IN HUNGARIAN OR ENGLISH, DEPENDING ON WHETHER THE PERFORMER IS HUNGARIAN OR FOREIGN.
INTERPRETING IS NOT AVAILABLE IN THE OTHER LANGUAGE.

ENGLISH PRESENTATIONS ARE MARKED IN BLUE.

Előadás / presentation Előadó / Performer Cég / company

Complete IoT solutions by Arrow

Bihari Tamás,
Arrow Electronics

Boa László,
IBM Magyarország

Arrow
NB IoT Referencia design bemutatása,  NB IoT technológia előnyei Lefánti Gábor,
Arrow Electronics

Boros Viktor,
Vodafone Magyarország

Arrow
Plant Lightning

The effect of proper LED lighting on plant growth.

Szabó Mihály,
Osram
Arrow
The new standard for smart factory

IPC-Hermes is now the only globally accepted and broadly established standard for machine to machine communication. All electronics manufacturers will strongly benefit from this new level of standardization progress.Obstacles with regards to implementing “smart factory” features will be dramatically reduced or removed.See how this new standard enables you to implement new possibilities in your factory.

Haithem JERIDI ASM
3D Inspection in Smart Factory

Importance of reliable measurements in Machine-to-Machine communication Automated programming of 3D inspection systems.

Jaroslav Neuhauser ATT
Az elektromos járműanalízis növekvő kihívásai Komáromi Zoltán Audi
Introduction of the production of printed ciruits, Auter Electronics Ltd 30 years anniversary

The process of preparing a printed circuit board layout, drilling choosing the suitable selective surface finsh, challenge of production of Rigid-Flex circuits, quality control of printed circuit boards during production, introduction of PCB manufacturing process using videos made in our 30 years old factory.

Lázár Edit Auter
Detection and protection of malicious or irresponsible drone usage

The market of drones for civil usage is growing rapidly, and the drones are getting smarter and getting cheaper. However, the risk caused by irresponsible or malicious users increases exponentially. At the same time, it is very expensive to detect these cheap drones and to develop effective techniques against them, an effort which is still in its infancy. The lecture deals with possible methods of detection and applicable countermeasure procedures. The presentation will also show some development results.

Dr. Kazi Károly BHE Bonn Hungary Kft.
Automotive electronics, reliability, safety

During the realization of smart environment those elements will have crucial roles that can be able to operate independently for long term (even for a decades), such as autonomous cars. The high reliability demands of the electronic components that realize the previous functions initiate a paradigm change; it is not enough to limit the failure possibility under a very low level till the end of the warranty period, but they need to guarantee the “failure free” operation for many years during the overall lifecycle of the system in question (e.g. accidents of autonomous cars caused by a regular and frequent electronic failure is not acceptable at all). These type of problems will be discussed in the presentation.

Dr. Harsányi Gábor BME
Quectel - the leader in 4G IoT modul manufacturing - NB-IoT, Cat-M

What challenges does IoT generate in 4G technology and what kind of answers gives Quectel to address NB-IoT and Cat-M

Berky Tibor ChipCAD
Könnyű, hetékony és modern megoldás hardverfejlesztéshez

Az előadás keretében megismerheti az Altium vezető NYÁK tervező megoldásait, az alkatrészek beszerzésétől kezdve az összeszerelési dokumentáció előkészítéséig. Emellett szó lesz a szimulációs lehetőségekről és a gépészeti programokkal való együttműködésről is. Az előadás végére meggyőződhet arról, hogy korunk NYÁK tervező programjai mennyivel többre képesek a Gerber fájlok elkészítésénél.

Zsikla Miklós Computer Controls Hungary Kft.
Intelligent material handling solutions for the electronics industry

A nagy mennyiségű áru és alapanyag beérkezésekor fellépő problémákra nyújtanak megoldást a Danutek Hungary Kft. berendezései. Az automata információ-feldolgozás, a röntgenes alkatrészszámlálás és az automata raktározás díjnyertes megoldásainak használatával létrehozható egy emberi hiba mentes, hatékony, gyors, átlátható és nyomonkövethető beérkeztetési folyamat. Ennek segítségével nincs többé alkatrészhiány miatt fellépő késlekedés, nincs félrecímkézés miatti hiba. Fejlett software-es hátterükkel garantálják, hogy a gyártás- és beszerzés-tervezés számára elérhető legyen minden szükséges információ. Általuk elérhetővé válik a Just In Time leltárstratégia.

Blajec Edgár Danutek
Importance to the ESD shoes in the electronic manufacturing - maintenance and test in the production

ESD protected footwear is one of the basis of ESD protection and is therefore of paramount importance in the installation and operation of the EPA area. The new ESD standard has significantly tightened the requirements for ESD footwear, so electronics manufacturers need to follow the new requirements. Selection of inappropriate ESD footwear represents significant financial and ESD protection risks for companies. The presentation presents the new ESD requirements and provides guidance for the selection, maintenance and testing of the appropriate ESD footwear.

Godó Attila D és társa
Szelektív forrasztás a napi gyakorlat tükrében (Avagy a szelektív forrasztás kihívások a mindennapokban)

Selective soldering is nowadays a widely used and increasingly common soldering process. Elas Kft. addresses the challenges, problems and mistakes of soldering on a daily basis. The presentation provides an insight, into the appearance of various soldering anomalies. It also aims to provide valuable guidance for the avoidance of them. We also show how they are classified by IPC standards. Finally we will Introduce various solutions for solder wave shape changes, soldering next to surface mount components or warped circuit boards.

Bődi Béla Elas Kft.
Capacitive sensor technology for applications verified by design

Azoteq’s ProxSense and ProxFusion sensor hardware offers design engineers the freedom to design for verification.

Alwyn Botha Endrich
Designing Electronic Systems for Circuit Protection Compliance & Robustness

Modern electronic systems must operate in global environments where transients such as ESD, EFT, Surges, Load Dump, or Lightning can be applied. These transients could damage or destroy the system which will require replacement or repair work in the field. This presentation reviews current overvoltage compliance standards required by the industrial, Automotive and Military 6 Aerospace markets. An overview of available Overvoltage Protection technologies is discussed which will provide the design enigineer with key knowledge to develop an compliant electronic system with robustness to operate effectively in the field.

Ian Doyle B. Eng Endrich
Smart displays and panel PCs from DLOGIC

Industrial Touch Displays simplify the interactionwith the user.

Georg P. Israel Endrich
A Low Power Wide Area (LPWA) technológiák és a Narrow Band IoT (NB-IoT)

Egy standard alapú, kis teljesítményű, nagy hatótávolságú (LPWA) vezeték nélküli technológia, amelyet kifejezetten az alacsony energiafelhasználású IoT eszközök és szolgáltatások kiszolgálására fejlesztettek ki. Belovai Beáta, a T-Systems szakértője átfogó képet ad az NB-IoT Partnerprogramról, hiszen a T-Systems számára rendkívül fontosak a meglévő és a jövőben hozzájuk csatlakozó partnerei, akikkel együtt alakíthatja ki a minőségi IoT-megoldások széles skálájtá.

Belovai Beátas Endrich
RF devices(400MHz to 8GHz frequency) for telematics, Car to car communication, GPS related, Router, small cell base station application. Tomoyuki Morioka Endrich
Az NB-IoT technológia gyakorlati felhasználása – FiboCom Cat NB / Cat-M és GPRS modemek szenzor adatátvitelre

NB-IoT alapú modell megismertetése.A tesztrendszer a T-Systems NB- IoT hálózattát felhasználva juttatja el egy hőkamera képét egy saját üzemeltetésű felhőszolgáltatásba.

Kiss Zoltán Endrich
How to use digital solutions - Do not fear of rtificial Intelligence

We are living in a world increasingly marked by digitalization and networking. This development is also filtering through into production areas previously shaped by the implicit expertise and experience of individual employees. The demand for reduced reliance on these leads to the deployment of new technologies. The presentation takes a look at the influence of new technologies in the area of process optimization as well as the associated benefits. Exciting scenarios describe future developments and provide food for thought on cross-sectoral implementation. Assistance systems make a major contribution in this context; they are to be seen as an opportunity for staff, not as a threat.

Tom Berx, Area Sales Manager, Ersa GmbH ERSA GmbH
Scheduling stochastic production processes with genetic and hybrid algorithms

The presentation will discuss about an optimization method that is applied to the stochastic process of testing field-returned mobile base station units.

Jónás Tamás Flextronic
Solutions for testing of EV and HEV and surrounding infrastructure

Development and production of hybrid (HEV) and electric (EV) vehicles brings a lot of new challenges regarding testing. The presentation will focus on solutions and instruments offered by H TEST for testing of HEV and EV vehicles and its components as well as surrounding infrastructure (charging stations).

Václáv Haasz HTEST
Hatékonyságfejlesztés és ipar 4.0

Technológiai workshopok témakörei: az Ipar 4.0 IT-technológiai alapjai; digitális tervezés, adatgyûjtés, adatfeldolgozás, adatvizualizáció; gyártásvezérlés, ERP és MES rendszerek; robotok, önvezetõ jármûvek alkalmazása

Fábián Zoltán IFKA
Nem érdemes kimaradni! – A sokat emlegetett ipar 4.0

Egyszerû és összetett ipar 4.0 megoldások bemutatása mintagyári látogatások és esettanulmányok keretében

Hegedűs Szilveszter IFKA
LMPA - Low melting point alloy

The Interflux LMPA™-Q Solder Alloy is an unique Low Melting Point Lead-Free Solder Alloy with enhanced mechanical reliability properties compared to SnBi(Ag). It’s the first Low Melting Point Solder Alloy that can be used in a reflow- , wave- and selective soldering process. Ever since the switch from leaded solder alloys to lead-free solder alloys, the market has been confronted with numerous problems in the soldering process. These problems are mainly due to the higher process temperatures needed when working with lead-free solder alloys. The extremely versatile Interflux LMPA™-Q solder alloy provides a long-awaited solution to the many problems.
Ez az első alacsony olvadáspontú forrasztó ötvözet, amely használható reflow, hullám- és szelektív- forrasztási folyamathoz egyaránt. Az ólmosról az ólommentes forraszanyagokra való váltás óta a gyártók rengeteg problémával kell megküzdeniük. Ezek a nehézségek többnyire a magasabb hőmérsékleten való forrasztásból adódnak.
A rendkívül sokoldalú Interflux LMPA ™ -Q forrasztó ötvözet régóta várt megoldást kínál az említett problémákra.

David De Somviele Interelectric
Cleaning in Electronics: new challenges in lead free assemblies

Presentation of Inventec’s worldwide activities in the precision cleaning business for the Electronic, Medical, Aircraft industries, fast spot free drying and coating.Most of these industries are closely connected because of the tight surface specifications, but also depending on health and environmental regulations.

Patrick J. Duchi Inventec
LORIOT – Ipari IoT middleware

Introduction to LORIOT and its contribution to the IoT Revolution.

Julian Studer LORIOT
A jövő energiatároló rendszerei Varga Zsigmond Kapacitás Kft.
Nitrogen supply solutions in electronics. How to determine the most optimal gas supply mode based on quantitative and qualitative industry-specific requirements?

Based on gas volume, purity, cost-efficiency and safety requirements of the domestic electronics manufacturing industry we give an overview on nitrogen supply solutions and the process of selecting the optimal supply mode: on-site gas production units installed directly on customer premises and operated by remote control, liquid gas supply from cryogenic storage tanks and trailers, packaged gas supply in cylinders and bundels. Gas quality, ie purity, residual impurities are critical to the manufacturing quality. Solutions to ensure gas supply at constant gas temperature. A brief overview on special gases, high purity gases and gas mixtures used in semiconductor, solar, display and LED production.

Herczeg István Messer Hungarogáz Kft.
How to achieve data security in embedded systems?Solutions by Trust Zone ATSAML11 microcontrollers and MPU/SiP processors

Az IoT alkalmazások száma rohamos ütemben növekszik. A jelentős növekedés a pozitív hatások mellett a rosszindulatú csoportok figyelmét is felkeltette. Az Iot rendszerek egyre vonzóbb cybertámadási felületet kínálnak és a hírekből hallhatjuk, hogy újabb és újabb cégek keverednek botrányba az IoT biztonság elhanyagolása miatt. Mit tehet Ön, hogy az IoT piac növekedéséből részesüljön és a leselkedő buktatókat elkerülje? Milyen technológiai újítások viszik sikerre a következő pojektjét?

Kolinger Attila Microchip
How to select the right solder wire for your application?

Selecting the best possible solder wire is always tricky. You need to design it from the very beginning to be cost effective. The solder process and wetting should allow the biggest possible process window, but residues are not wanted. At least the residues should not be that visible and should show highest electrical safety for not influencing your product over the full life cycle. The mechanical properties of the selected alloy should fit into the life scenario of your products, too! Lots of different things to consider and a few important things how to select the right solder wire for your manufacturing will be discussed in this session.

Jens Gruse
(Stannol GmbH – a Microsolder partnere)
Microsolder Kft.
Monolithic Power System: Korszerű kapcsolóüzemű tápegység megoldások (angol)

As a leading international semiconductor company, Monolithic Power Systems (MPS) creates cutting-edge solutions to improve the quality of life with green, easy-to-use products.
- company Introduction - package technology at MPS - brief portfolio overview (Power, Motordriver , Angular sensors) - Step down converter for Industrial & automotive

Torsten Lessnau Monolithic Power Systems (MPS)
Tackling the Test Challenges of Next Generation ADAS Vehicle Architectures

Next generation ADAS/AD systems claim new requirements for validation and manufacturing tests. Distance to be driven during validation tests simply cannot be achieved by driving on physical roads. On the production floor we need implementation of new type of tests, compressing tens of meters of physical distance into standard test racks.The goal of my presentation is to show how to achieve high test coverage while decreasing the test time and physical space needed.

Litkei Márton András National Instrument
Valós idejű gyártóberendezés monitorozási rendszer megvalósítása National Instruments eszközeivel és szoftveréivel

NI has been creating highly productive systems for engineers and scientists. We fundamentally believe that by making engineers and scientists more productive we can have the greatest impact on our customers business. Our approach is to accelerate productivity, innovation, and discovery through a software-centric platform for developing any system that needs test, measurement, and control. We believes fundamentally that our customers know their requirements Better than anyone and should be able to construct the system that exactly meets those requirements. We will show one possible solution with our software and hardware for real time monitoring system which we are using at our production in Debrecen.

Uzdi István National Instrument
Soldering processes - Applications and trends

The electronics industry is the second strongest industry in Europe and is constantly growing. In order to remain competitive, it is necessary not only to follow the technological trends, but also to actively shape them. In this presentation, the new requirements for the soldering process of electronic assemblies will be explained and the corresponding solution approaches will be presented. Among other things, the further development of vacuum soldering technology, possibilities for saving resources and approaches for implementing the I4.0 strategy regarding predictive maintenance options will be discussed.

Paul Wild Rehm Group
Nothing remains hidden!

Strengths and challenges of the trailblazing 3D X-ray inspection in the electronics industry

Helge Höche Viscom AG